Pycom SiPy - SigFox, WiFi & Bluetooth IoT Development Platform - Server On The Move
Click to enlarge

in stock

Pycom SiPy - SigFox, WiFi & Bluetooth IoT Development Platform

Vendor: Server On The Move
SKU: SiPy1-0
$49.99
Real Time 14 Visitor Right Now
2 YEARS OF SIGFOX CONNECTIVITY INCLUDED

The SiPy is a triple bearer MicroPython enabled microcontroller perfect enterprise-grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the SiPy offers a perfect combination of power, friendliness, and flexibility. Create and connect your things everywhere. Fast. Our module is CE, FCC, IC, and RCM certified!

If you are purchasing the SiPy and wish to connect via USB to your computer, you will also need either the Expansion Board 3.0, Pysense or Pytrack.

The SiPy is a multi-network (Sigfox, WiFi and BLE) development platform. It is programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India. You can also configure the SiPy in FSK mode to send packets directly from SiPy to SiPy. This way you can create the network configuration of your choice and then use another SiPy as central Nano-Gateway to forward the data to the cloud via WiFi. Our module is CE, FCC, IC and RCM certified!

NOTE: Using the Sigfox radio without the external antenna can lead to damage of the device and is therefore not recommended.

SIPY FEATURES
  • Powerful CPU, BLE and state of the art WiFi radio
  • 1KM WiFi range
  • MicroPython enabled
  • Fits in a standard breadboard (with headers)
  • Ultra-low power usage: a fraction compared to other connected micro controllers
  • PROCESSING
  • Espressif ESP32 chipset
  • Dual processor and WiFi radio system on chip
  • Network processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
SIGFOX OPERATING FREQUENCIES
  • RCZ1 – 868MHz (Europe)
  • RCZ2 – 902MHz (US, Canada and Mexico)
  • RCZ3 – (Japan and Korea)
  • RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)
INTERFACES
  • 2 x UART, 2 x SPI, I2C, I2S, micro SD card
  • Analog channels: 8×12 bit ADCs
  • Timers: 4×16 bit with PWM and input capture
  • DMA on all peripherals
  • GPIO: Up to 24
HASH / ENCRYPTION
  • SHA
  • MD5
  • DES
  • AES
WIFI NETWORKING
  • 802.11b/g/n 16mbps
BLUETOOTH
  • Low energy and classic
RTC
  • Running at 32KHz
RANGE
  • Node range: Up to 50km
SECURITY & CERTIFICATIONS
  • SSL/TLS support
  • WPA Enterprise security
  • AES encryption engine
MEMORY
  • RAM: 512kb
  • Flash Memory: 4MB

Hardware floating point acceleration
Python multi-threading

SIGFOX SPECIFICATION

  • TI CC1125NarrowbandTransceiver
  • Class 0 device. Maximum Tx power:
  • +14dBm (Europe)
  • +22dBm (America)
  • +22dBm (Australia and New Zealand)
  • Node range: Up to 50km
  • Sigfox certified

POWER

  • Voltage Input: 3.3V – 5.5V
  • 3v3 output apable of sourcing up to 400mA
  • WiFi: 12mA in active mode, 5uA in standy
  • Sigfox (Europe): 17mA in Rx mode, 47mA in Tx mode and 0.5uA in standby
  • Sigfox (Australia, New Zealand and South America): 24mA in Rx mode, 257 mA in Tx mode and 0.5uA in standby

DIMENSIONS
Size: 55mm x 20mm x 3.5mm (Without Headers)

Weight: 7g