Particle Argon KIT - IoT with BLE, Wifi and Particle Mesh - Server On The Move
Click to enlarge
-12%

Out of stock

Particle Argon KIT - IoT with BLE, Wifi and Particle Mesh

Vendor: Server On The Move
SKU: PARTICLE-ARGON
$39.99 $34.99
Real Time 24 Visitor Right Now

Kit contains:

  • Particle Argon Development Board
  • USB Cable
  • Mini Breadboard
  • components (LED, resistors)

The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.

The Argon is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints.

SPECIFICATIONS

  • Espressif ESP32-S0WD 2.4G Wi-Fi coprocessor
    • Onboard 1MB flash for ESP32 chip
    • 802.11 b/g/n support
    • 802.11 n (2.4 GHz), up to 150 Mbps
  • Nordic Semiconductor nRF52840 SoC
    • ARM Cortex-M4F 32-bit processor @ 64MHz
    • 1MB flash, 256KB RAM
    • IEEE 802.15.4-2006: 250 Kbps
    • Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps
    • Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations
    • ARM TrustZone CryptoCell-310 Cryptographic and security module
    • Up to +8 dBm TX power (down to -20 dBm in 4 dB steps)
    • NFC-A tag
  • On-board additional 2MB SPI flash
  • 20 mixed signal GPIO (6 x Analog, 4 x PWM), UART, I2C, SPI
  • Micro USB 2.0 full speed (12 Mbps)
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • On-board 2.4GHz PCB antenna for Thread/BLE or Wi-Fi (user selectable)
  • Two U.FL connectors for external antennas (one for Thread/BLE, another for Wi-Fi)
  • FCC, CE, and IC certified
  • RoHS compliant (lead-free)
  • Meets Feather specification in dimension and pinout