What we want to achieve

Monitor print through build-in Flashforge Adventurer 3 camera.

Requirements

• Flashforge Adventurer 3 - 3D Printer
• Camera mode must be either set to automatic or manual - camera
• Light (either build in LED must be turned on or some external source)
• IP address of 3D printer must be known

Restrictions

This tip will only work

• internal network - computer must be on the same network as the 3D Printer
• the printer stream has been exposed to the outside network. Note: The stream is not secured - hence this is not recommended

How to

Point to your web browser to:

http://<ip address of your 3D printer>:8080/?action=stream