Out of stock
LilyPad LilyMini ProtoSnap
Warning: This board comes with a demo program implementing three different modes (see below).
For Arduino support see
https://learn.sparkfun.com/tutorials/programming-the-lilymini/all
The LilyMini ProtoSnap ships with pre-loaded code that uses all the LilyPad pieces connected to it. This sample code has three modes, which can be selected by pressing the LilyPad Button on the bottom-left side of the ProtoSnap. The built-in RGB LED on the LilyMini will change colour to indicate which mode has been selected:
- White: All LEDs on.
- Magenta: LEDs fade in and out in a breathing pattern. When the light sensor is covered, LEDs fade faster.
- Cyan: LEDs off. When the light sensor is covered, LEDs will twinkle.
The LilyMini board, at the centre of the ProtoSnap, has a built-in battery holder for a CR2032 battery (included). The board can also be powered through the micro USB port while connected to a computer for reprogramming. On the opposite side of the LilyMini, you will find the SAMD11 brain, which controls the ProtoSnap.
Note: A portion of this sale is given back to Dr Leah Buechley for continued development and education in e-textiles.
Get Started with the LilyMini ProtoSnap Guide
Included on the ProtoSnap:
- 1x LilyMini (battery included)
- 1x LilyPad Light Sensor
- 1x LilyPad Button
- 4x LilyPad LEDs
Documents:
