128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick
128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick
128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick
128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick

128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick

Regular price
$27.99
Sale price
$27.99
Tax included.

This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with an embedded controller, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

FEATURES

  • Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor
  • 1x joystick (5-position), 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

SPECIFICATIONS

  • Driver: SH1106
  • Interface: 4-wire SPI, 3-wire SPI, I2C
  • Display colour: blue
  • Resolution: 128x64
  • Operating voltage: 3.3V

INTERFACE

SYMBOL Raspberry Pi PIN (BCM) DESCRIPTION
KEY1 P21 Button 1/GPIO
KEY2 P20 Button 2/GPIO
KEY3 P16 Button 3/GPIO
Joystick Up P6 Joystick Up
Joystick Down P19 Joystick Down
Joystick Left P5 Joystick Left
Joystick Right P26 Joystick Right
Joystick Press P13 Joystick Press
SCLK P11/SCLK SPI clock input
MOSI P10/MOSI SPI data input
DC P24 Data/Command selection (high for data, low for command)
CS P8/CE0 Chip selection, low active
RST P25 Reset, low active

 

RESOURCES

http://www.waveshare.com/wiki/1.3inch_OLED_HAT