1.3 inch OLED Display HAT Expansion Board For Raspberry Pi 2B/3B for Zero W - Server On The Move
Click to enlarge

in stock

1.3 inch OLED Display HAT Expansion Board For Raspberry Pi 2B/3B for Zero W

Vendor: Server On The Move
SKU: OLED-HAT-128x64
$28.88
Real Time 14 Visitor Right Now

 

Our 1.3-inch OLED Display HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W features a 40-pin male header, a joystick with five positions and three buttons.

This 128x64 resolution OLED display is driven by an SH1106 chip and exposes 4-wire SPI, 3-wire SPI and I2C interfaces. It requires a 40-pin male header soldered to the Raspberry Pi to be connected through the 40-pin HAT interface and 40-pin male socket.

This product provides a cost-effective way to add high-resolution display capability to Raspberry Pi models. By connecting to the 40-pin HAT interface, the display can be used in various applications, from small projects to larger ones.

It's a convenient way to add more functionality to your Raspberry Pi. It can easily be powered by the Raspberry Pi GPIO interface, meaning it does not require an external power source. The SH1106 chip provides a sharp, high-contrast display that is bright and easily readable, with a wide operating temperature range of -40 to +85℃.

The manuals click here

Demo code can be found here

SPECIFICATION

  • Driver: SH1106
  • Interface: 4-wire SPI, 3-wire SPI, I2C
  • Display colour: blue
  • Resolution: 128x64
  • Operating voltage: 3.3V

INTERFACE

SYMBOL Raspberry Pi PIN (BCM) DESCRIPTION
KEY1 P21 Button 1/GPIO
KEY2 P20 Button 2/GPIO
KEY3 P16 Button 3/GPIO
Joystick Up P6 Joystick Up
Joystick Down P19 Joystick Down
Joystick Left P5 Joystick Left
Joystick Right P26 Joystick Right
Joystick Press P13 Joystick Press
SCLK P11/SCLK SPI clock input
MOSI P10/MOSI SPI data input
DC P24 Data/Command selection (high for data, low for command)
CS P8/CE0 Chip selection, low active
RST P25 Reset, low active