128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick - Server On The Move
Click to enlarge
-17%

in stock

128x64, 1.3inch OLED display HAT for Raspberry Pi, Arduino, STM32 w buttons and joystick

Vendor: Server On The Move
SKU: OLED-13890
$33.98 $27.98
Real Time 16 Visitor Right Now
Free Shipping on all orders. No Minimum Spent.

This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with an embedded controller, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

FEATURES

  • Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor
  • 1x joystick (5-position), 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

SPECIFICATIONS

  • Driver: SH1106
  • Interface: 4-wire SPI, 3-wire SPI, I2C
  • Display colour: blue
  • Resolution: 128x64
  • Operating voltage: 3.3V

INTERFACE

SYMBOL Raspberry Pi PIN (BCM) DESCRIPTION
KEY1 P21 Button 1/GPIO
KEY2 P20 Button 2/GPIO
KEY3 P16 Button 3/GPIO
Joystick Up P6 Joystick Up
Joystick Down P19 Joystick Down
Joystick Left P5 Joystick Left
Joystick Right P26 Joystick Right
Joystick Press P13 Joystick Press
SCLK P11/SCLK SPI clock input
MOSI P10/MOSI SPI data input
DC P24 Data/Command selection (high for data, low for command)
CS P8/CE0 Chip selection, low active
RST P25 Reset, low active

 

RESOURCES

http://www.waveshare.com/wiki/1.3inch_OLED_HAT