No products in the cart.
Total: $0.00
WHAT ARE YOU LOOKING FOR?
Four 9V Battery Clips with bare wires for connecting 9V batteries to your projects. On one end, this 9V Battery Clip features a connector for a 9V battery and the other end two bare wires for...
Great for smaller projects - hand palm-sized 6V 1W polycrystalline solar panel. You will need to solder your own cables on the panel. SPECIFICATION Maximum Power Voltage (Vmp): 6V Maximum Power Current (Imp): 167mA Open-Circuit Voltage...
Use our Anti-Static Bag to protect your microelectronics from static.With a size of 10x15 cm the Anti-Static Bag is big enough to fit HDD, development boards, etc. and can be closed with a zip lock.The...
This clever battery holder will accomodate 4 AA batteries, giving your project 6V to play with. It features an off/on slider as well as a cover to protect the batteries. The bare cables can be...
Think of this expansion board as a mSATA to USB3.0 adapter onto a Raspberry Pi form factor. This means that, while the mSATA drive plugs into the board (fixed with two screws), additional mounting can...
These displays were used in old Nokia 5110/3310 mobile phones - when phones were still phones and not a portable brainwashing machine. It's an 84x48 pixel monochrome LCD display with a build-in PCD8544 controller/driver. This version supports...
The MLX90614ESF-BAA is an infrared thermometer for non-contact temperature measurements with a wide Field of View at a whopping 90°. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and...
The "official" Pi Zero W case to fit your new Pi Zero W - fashionable in red and white. Note: You are only purchasing the case, the Pi Zero W is not included and only...
Our OLED 0.96" 128x64 dual colour display works great without backlight. Works great with the Adafruit SDD1306 libraries.I2C Address can be seen on the back of the display. Can be changed by re-soldering the resistor. SPECIFICATIONPower Consumption:...
The Power Shield is the best way to provide power to your mobile Particle projects. Based on the MCP73871 battery management controller, this shield allows you to simultaneously power a Photon and charge a connected...
Basic two-piece water sensor which measures the soil moisture. The sensor connects to the sensor module which manages the digital and analog output. It operates on 3.3V - 5V and has a digital output as...
Another great module. This beauty has an ESP32 with a 1.14-inch colour display on one board. As with any other ESP32, this board can be also programmed using the Arduino IDE. SPECIFICATION ESPRESSIF-ESP32 240MHz Xtensa®...
We use cookies to personalise content and adverts and to analyse traffic. Cookie Policy
Please login and you will add product to your wishlist
Added to wishlist successfully!
Vendor:
Availability ___product_availability___
