Products (13)
Filter Close
Add to CompareAdded to Compare
3D Printer Extruder Nozzle Wrench MK10 MK8 E3D V6
Quick View

3D Printer Extruder Nozzle Wrench MK10 MK8 E3D V6

This multipurpose wrench can be used to remove nozzles of different sizes and hold the heat block. Suits different Nozzles and heatblock sizes.

$4.88
Add to CompareAdded to Compare
50Pcs 3D Printer Resin and IPA Paper Filter
Quick View

50Pcs 3D Printer Resin and IPA Paper Filter

In 3D printing with resin, these filters can be used to pour the resin back into a bottle to filter out the artefact left behind in the vat from debris falling off clean alcohol or...

$12.88
Add to CompareAdded to Compare
Sale
Bowden Pneumatic Connector Brass M6 - 4mm OD For 3D Printer
Quick View

Bowden Pneumatic Connector Brass M6 - 4mm OD For 3D Printer

A Pneumatic Connector for a 4mm Outer Diameter Bowden Tube. Features an M6 thread and inner bore of 4mm made out of Brass.

$6.88 $6.44
Add to CompareAdded to Compare
Sale
Extruder Clearing Bow Unclog Tool
Quick View

Extruder Clearing Bow Unclog Tool

A tool is used to unclog your nozzle by forcing the filament through the nozzle. Heat the nozzle to 5 degrees above the max temperature of your filament and insert the tool into the filament...

$8.88 $8.22
Add to CompareAdded to Compare
Genuine Prusa assembled hotend E3D (MK3S+)
Quick View

Genuine Prusa assembled hotend E3D (MK3S+)

This product is the replacement Assembled hotend E3D for MK3S+. It is ONLY compatible with the MK3S+. It is NOT compatible with the MK3/S due to the PTFE tube's different lengths. This hotend was directly...

$156.66
Add to CompareAdded to Compare
Out of stock
Genuine Prusa Einsy RAMBo (MK3S/+)
Quick View

Genuine Prusa Einsy RAMBo (MK3S/+)

This Einsy RAMBo has the MK3S/+ firmware pre-installed. It does NOT have the MK3 firmware pre-installed. Does not include cables This product is directly sourced from Prusa. This product includes: Einsy RAMBo with MK3S/+ firmware (1 pcs) Plug...

$222.22
Add to CompareAdded to Compare
Genuine Prusa Frame and Y-carriage
Quick View

Genuine Prusa Frame and Y-carriage

Frame and Y-carriage - available individually or as a set. This product is directly sourced from Prusa. Only for MK3/S/S+

$144.44
Frame
Y-Carriage
Frame and Y-Carriage Set
Add to CompareAdded to Compare
Genuine Prusa Print fan (MK3/S/+, MINI/+)
Quick View

Genuine Prusa Print fan (MK3/S/+, MINI/+)

This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+. This product includes: Print fan (1 pcs) This product is directly sourced from Prusa.

$16.88
Add to CompareAdded to Compare
Genuine Prusa Smooth Rod
Quick View

Genuine Prusa Smooth Rod

This product includes: Smooth rod (1 pcs) Specifications: Material: Hardened steel Diameter: 8mm Length: X-Axis: 370 mm Y-Axis: 330 mm Z-Axis: 320 mm This product is directly sourced from Prusa.

$32.22
X-Axis
Y-Axis
Z-Axis
Add to CompareAdded to Compare
Genuine Prusa Stepper motor
Quick View

Genuine Prusa Stepper motor

This product includes: Stepper motor as selected Trapezoid nut (1 pcs) (Z-Axis Only) Specifications: Connector: MOLEX 50-57-9404 Rated current: DC 1A This product is directly sourced from Prusa.

$68.88
E-Axis
Z-Axis Left
Z-Axis Right
X-Axis
Y-Axis
Add to CompareAdded to Compare
Genuine Prusa SuperPINDA
Quick View

Genuine Prusa SuperPINDA

SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). When replacing the original probe with SuperPINDA make sure to use the 3.9.2 or higher firmware version. SuperPINDA is temperature-independent, with higher quality sensor, and...

$54.44
Add to CompareAdded to Compare
Original Prusa Bondtech drivegear (set)
Quick View

Original Prusa Bondtech drivegear (set)

This product includes: Bondtech gear with a grub screw (1 pcs) Bondtech without a grub screw (1 pcs) Bearings (2 pcs) Shaft (1 pcs) Sourced directly from Prusa

$100.22
loading......