L298N Dual H-Bridge Motor Driver Module
Click to enlarge
-10%

in stock

L298N Dual H-Bridge Motor Driver Module

Vendor: Server On The Move
SKU: L298N-1
$18.88 $16.88
How Many?:
Real Time 17 Visitor Right Now
Free Shipping on all orders. No Minimum Spent.

 You need a means to control and power movement in your project?

This beautiful module features a double H driver module powered by an ST L298N dual full-bridge driver.

The ST L298N is an integrated monolithic circuit in 15- lead Multiwatt and PowerSO20 package. It is a high voltage, high current dual full-bridge driver and designed to accept standard TTL logic levels. It can drive inductive loads such as relays, solenoids, DC and stepping motors.

Two inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.

FEATURES

  • Lightweight
  • small dimension (compared to Arduino Shields)
  • Super driver capacity
  • FWD protection
  • Heavy load Heat sink
  • 2 current probe port
  • Power selection switch
  • 4 pull up resistor switch
  • 2 DC motor/ 4 coil dual phrase stepper motor output
  • Motor direction indication LED
  • 4 standard mounting hole

SPECIFICATION

  • Driver: L298N
  • Driver power supply: +5V~+35V
  • Driver Io: 2A
  • Logic power output Vss: +5~+7V (internal supply +5V)
  • Logic current: 0~36mA
  • Controlling level: Low -0.3V~1.5V, high: 2.3V~Vss
  • Enable signal level: Low -0.3V~1.5V, high: 2.3V~Vss
  • Max power: 25W (Temperature 75 cesus)
  • Working temperature: -25C~+130C
  • Dimension: 60mm*54mm
  • Driver weight: ~48g
  • Other extensions: current probe, controlling direction indicator, pull-up resistor switch, logic part power supply.